Lizard style down tube mounting Li-Ion pack in stylish thin ABS case with auto-connect socket, with a charge indicator, security lock and accessories.

The ENVO battery is a battery you can mount on the bike’s frame 2 water bottle bolt mount. This is the thinnest battery case for suspension frames or small size frames. Check the bicycle frame down tube geometry then select.  The battery can be locked to its support or un-lock and slide out to remove.

  • Li-Ion 36V  12.8Ah
  • Energy: 375Wh
  • Max Power: 750W
  • Average Range for 350W class city use: 42Km
  • Standard recharge time 5 hours

Battery Pack Specification:

  • PVC covered 18650Cells and BMS pack
  • No. of cells 40/10S4P
  • Internal Impedance ≤100mΩ
  • Max. Charge Voltage 42V
  • Normal Charge Current 2A
  • Cut-off Discharge Voltage 30V
  • Charging Model CC/CV
  • Charge Temperature 0-45°C
  • Discharge Temperature -20-55°C
  • Motor Range 36V250-500W
  • BMS PCB 37V 10cell
  • 3.0kg


  • LCD3 meter provides you with a variety of functions such as vehicle controls and vehicle status digitized displays to meet the trip demands
  • Pedal Assist System (PAS) optimized to simulate the torque sensor. This computing system provides Speed limit PAS or Torque limit PAS levels from 0 to 5
  • Trip time display (with displays of a single trip time (TM) and total trip time (TTM))
  • Trip speed display (with displays of real-time speed (Km/H or MPH) and a single maximum speed (MXS) and a single average speed (AVS))
  • Trip distance display (with displays of a single trip distance (DST) and total trip distance (ODO))
  • Display of turned on the handlebar
  • Display of power-assist startup
  • Power assistant ratio (or handlebar) gear (ASSIST) switch
  • 6Km/H power assistant push function
  • Cruise function (CRUISE)
  • Battery capacity indicator
  • Real-time battery voltage (VOL) display
  • Motor power and temperature (MOTOR) display
  • Brake display
  • Turn on backlighting and lights 
  • Environment temperature display
  • Data clearing
  • Fault code display
  • User parameter setting
  • 5′ large screen
  • Rubber clamp spacer is provided for 3 handlebars bore sizes: 22.5mm, 25.4mm, 31.5mm
  • easy key button, easy control
  • waterproof housing with good appearance

 Motor Controller:

  • Brushless Motor Controller
  • Voltage: 36V
  • Min Voltage: 30+-0.5V
  • Max Current: 17+-1A
  • Speed Set: 1-4.2V
  • Angle: 120
  • Brake Input: Low-Level

Thumb Throttle:

  • Haul effect sensor, Analogue linear increasing torque

Pedal Assist Sensor

  • 2 pieces 12 Magnet easy assemble Pedal Assist Sensor,
  • Just stick the sensor, no need to disassemble the crank.
  • this sensor is compatible with optimized PAS controlling systems and provides the best pedal assist performance, rapid response and torque sensor simulation.

Brake cut-off magnetic switches

  • Just stick the magnet sensors, no need to disassemble the brake levers.
  • it cuts-off the motor when you brake

Rainproof Controller and Tool Bag